-
Pale white-gray particles provide strong contrast on most metal surfaces, including high reflective surfaces during dry method mag particle testing -
Pale yellow particles provide strong contrast on light, medium and dark colored metal surfaces during dry magnetic particle testing -
Rust red particles provide strong contrast on most metal surfaces during dry magnetic particle testing -
Highly sensitive fluorescent magnetic particle powder for locating very fine discontinuities in critical applications, can be mixed with oil or water -
14A Aqua-Glo is applied to magnetized parts prior to inspection. It is used to detect cracks and seams, as well as inclusions, laps, tears and flakes. 14A Aqua-Glo can detect flaws that are open to the surface of the part, or slightly sub-surface. Parts tested can be forgings, welds, castings, and stamped or machined ferromagnetic materials, such as steel and other alloys of iron, nickel, and cobalt. -
Water-based fluorescent magnetic particle concentrate with 14A particles for locating very fine discontinuities in critical parts -
Highly sensitive oil-based magnetic particle suspension with 14A particles for locating very fine discontinuities in critical parts. -
Fluorescent magnetic particle premix with 14A particles for locating fine discontinuities in high volume applications with water-based mag particle bath. -
A highly-sensitive non-fluorescent, colored magnetic particle powder for wet magnetic particle testing on finished and in-process parts. -
A highly-sensitive oil-based magnetic particle suspension aerosol for nonfluorescent wet mag particle testing to find fine and medium discontinuities. -
A concentrated, silicone-based defoamer for water-based systems, used to reduce excessive foaming. It should be added sparingly, per manufacturer’s recommendations. -
Water-soluble corrosion inhibitor for water-based magnetic particle suspensions protects parts and magnetic equipment from rusting. -
Petroleum suspension vehicle for wet mag particle testing provides excellent particle mobility, good suspension stability and enhanced corrosion protection. -
CircleSafe® 778A is an aerosol spray can of Mi-Glow® 800 fluorescent yellow-green particles and liquid Wetting Agent 771, formulated in water media. -
CircleSafe® 820A is an aerosol spray can of Mi-Glow® 106 black particles, premixed with liquid Wetting Agent 771, formulated in water media.
-
CircleSafe® 820AX is an aerosol spray can of Mi-Glow® 106 black particles and CircleSol M™, a refined petroleum distillate. -
A high flashpoint, refined petroleum distillate specifically designed for use in magnetic particle inspection with its high clarity, low fluorescence and no odor characteristics. -
Cleaner 500 is a mild alkaline cleaner excellent for use in cleaning out an oil-based or water-based system prior to going to the water-based system or in between baths. -
Corrosion Inhibitor 7 is a concentrated corrosion inhibitor used to supplement a water bath system with additional corrosion protection.
-
The REL C4 Magnum GLO-Black LED UV inspection light utilizes the latest in safe high output UV-A LED technology. This GLO-Black LED UV inspection light is a highly maneuverable lightweight solution that maximizes operator safety and time on task. The C4 Magnum contains 4 high flux-UV LED emitters that have a built in static-electric discharge circuit to allow the light to perform in all environments regardless of ambient conditions. -
The REL C4 Magnum-GO LED UV-A Lamp and White Light integrates both UV-A and white light emitters. The Magnum-GO utilizes the latest in safe high output LED technology. This ergonomically designed inspection lamp is a highly maneuverable lightweight solution that maximizes operator safety and efficiency. -
Mi-Glow® 106 is black particles for use with CircleSol M™, a refined petroleum distillate, or Wetting Agent 771, in a water system. -
Mi-Glow® 418 is Mi-Glow® 800 and Mi-Glow® 920 fluorescent yellow-green particles premixed with powdered Wetting Agent 34 for use in water media. -
Mi-Glow® 778 is Mi-Glow® 800 fluorescent yellow-green particles premixed with liquid Wetting Agent 771 for use in water media. -
Mi-Glow® 800 is fluorescent yellow-green particles used with CircleSol M™, a refined petroleum distillate. -
Mi-Glow® 800L is a pre-proportioned combination of Mi-Glow® 800 fluorescent yellow-green particles and CircleSol M™, a refined petroleum distillate, packaged ready-for-use in five-gallon cans. -
Mi-Glow® 834 fluorescent yellow/green particles premixed with powdered Wetting Agent 34 for use in water media. -
Mi-Glow® 920 is fluorescent yellow-green particles used with CircleSol M™, a refined petroleum distillate. It is designed to be used with black light to detect forging type discontinuities. -
Mi-Glow® WCP is a specially formulated, fast drying white contrast paint, used to create a consistent background on the component surface in a visible magnetic particle inspection. -
Water-Based Visible Magnetic Particle Suspension
A highly-sensitive water-based magnetic particle fluid for non-fluorescent (visible) wet method magnetic particle testing to locate fine and medium discontinuities on finished parts. MV-740 provides clear, strong indications due to the heavy buildup of the highly magnetic particles. The product is ready-to-use, so no dilution is required. MV-740 is often used with WCP-2 white contrast paint to improve contrast and inspection sensitivity. -
The REL Model GLO-Black Profusion LED UV Inspection light system utilizes the latest in safe high output UV-A LED technology. This black light is a highly conformable modular solution that maximizes operator safety and time on task. Each Profusion module contains separate 4 high flux-UV LED emitters that have a built in static-electric discharge circuit to allow the light to perform in all environments regardless of ambient conditions. -
REL Profusion XW Attributes: Waterproof - IP68 Rated 100% Continuous duty at full output Emitter: UV-A -
REL, Inc. has added ergonomic elegance to the Glo-Black family of engineered inspection lamps with the addition of the Liquid Nomad and Liquid Magnum. These two lamps were developed to address Operator Safety and rigorous precision demanded during the inspection of complex part geometries encountered in FPI and MPI inspections. -
The REL Nomad-Ascent is the highest power density lamp in the LED UV-A inspection market. This lamp delivers a powerful uniform beam pattern from a compact rugged machined housing of military grade aluminum. The Nomad-Ascent features a solid-state switch along with fluoroelastomer sealed interfaces to deliver punch way above its weight class. -
REL’s Nomad-Eclipse is the highest power density lamp in the LED UV-A inspection market. This lamp delivers a powerful uniform UV-A beam pattern + white light from a compact rugged machined housing of military grade aluminum. The certified, hands-free, cord-free, waterproof Nomad-Eclipse with its industry leading 5-Year Warranty will change your perception of what is possible. -
Sir-Chem® Dry Powder 61 is a highly refined nonfluorescent gray magnetic powder used for dry method magnetic particle inspection.
