- Effective in removing oily soils, light grease, finger prints, cutting fluids and coolants, salt residues, loose scale and rust.
- Safe for use on steel, aluminum, magnesium, copper, titanium, nickel alloys; most plastics, composites and bonded paints.
- Nonflammable, phenol free, heavy metals free, low foaming, and utilizes biodegradable surfactants.
- Used in soak tanks, agitated dip tanks, spray washers, steam cleaners, and ultrasonic cleaners.
- Low foaming, free rinsing, yielding clean streak free surfaces.
-
Features and Benefits: -
Advanced Digital Radiometer/Photometer Kit
Single detector with dual sensors measures both ultraviolet and visible light. Complies with ASTM specifications for MPI and FPI. Specially engineered for NDT applications.
-
AccuPRO™ Series meters feature an advanced, microprocessor-controlled readout unit calibrated to accurately measure and display UV-A, Blue, and Visible light readings.
Available in two versions: The AccuPRO™ (XP-2000) readout unit features a single dual-wavelength sensor detector designed to measure both ultraviolet and visible light. The AccuPRO™ Plus (XP-4000) features a single 3-in-1 multi-purpose sensor that measures ultraviolet, visible and blue light. These compact, lightweight, battery-operated units are ideal for use in the field, the factory or anywhere accurate light measurements are needed! -
Highest Quality, Longest Running, Most Convenient Compliant LED UV-A Flashlight in the World!
>Available in two models: Standard-Intensity (SPN-CLR365-SC) High-Intensity (SPN-CLR365-HC) -
The Gould-Bass DLM-1000 Digital Radiometer is a portable, 3-1/2 digit instrument that measures either blacklight intensity in the spectral range of 320-400 nanometers in microwatts per square centimeter or visible light intensity of 380-700 nanometers (photometric response) in footcandles, depending upon the sensor selected. -
The Gould-Bass DLM-1500 Digital Radiometer is a portable, 3-1/2 digit instrument that measures a spectral range of 380-700 nanometers both luminance in Footlamberts, or illuminance (photopic response) in Footcandles. -
Provides increased accuracy for more repeatable results.
- Measures UV-A light sources with overall accuracy of ± 5% per NIST standards
- Auto-zeroing, excellent linearity and cosine response, solid-state design, compact, durable, simple operation, battery-level indicator
- Sealed silicone photodiode protects against shock and humidity
- Sensor housing is constructed with series of baffles and unique self-sealing mechanism to eliminate light leakage
- Compact, lightweight and battery operated so measurements can be taken anywhere
- Complies with ASTM specifications for MPI and FPI
-
DR-60 Cleaner-Remover is used in the penetrant process to remove excess, nonwater-washable penetrants from part surfaces, e.g., Sherwin DP-40 Dye Penetrant (visible red) and Sherwin RC-65 and RC-77 Flourescent Penetrants. It is a manual “wipe on” and “wipe off” material and, consequently, recommended for small areas. -
DR-62 Cleaner-Remover is used in the penetrant process to remove excess, non water-washable penetrants from part surfaces, e.g., Sherwin DP-40 Dye Penetrant (visible red) and Sherwin RC-65 and RC-77 Fluorescent Penetrants. It is a manual “wipe on” and “wipe off” material and, consequently, recommended for small areas. -
E-50 emulsifier is ideal for use on rough castings and other metal surfaces which tend to retain penetrant readily, which causes high background and difficulty in evaluating indications.It is effective in rendering most light oily soils water washable and has been used as a pre-wash cleaner for tough to clean surfaces. It has found use as a concrete cleaner for the removal of oily residues. The emulsifier is applied, allowed to soak in for a few minutes , and then washed off with water spray. -
E-57 is a Method B (lipophilic) inspection penetrant emulsifier approved to AMS-2644 for use with FP- 93A(M), FP-95A(M), and FP-97A(M) fluorescent (Type 1) post emulsifiable penetrants and is used as supplied. -
For immersion the use range is 17 – 20 % or 1 part emulsifier to 4 parts water. The concentration is controlled by using a brix refractometer and a concentration chart. For spray applications the concentration is kept below 5 %. In immersion applications the penetrant covered part is given a quick water wash and then immersed into the gently agitated emulsifier from 30 seconds to 2 minutes depending upon the part surface roughness. The part is removed and washed. The pre-rinse step may be omitted for the spray application method of the emulsifier. -
- As a pre-cleaner it is sprayed directly on the test surface.
- As a penetrant remover it is sprayed onto wiping media and then the penetrant wiped from the surface.
- The remover should not be sprayed directly on to the test surface to remove the excess penetrant as the sensitivity will be impaired.
- Contains flammable solvents and should not be used in confined spaces or near open flames or sparks.
Available as 1 pint (0.5 L), 1 gallon (3.8 L), 5 gallon (18.9 L), 55 gallon (208 L)
-
ER-85 is a Method B emulsifier. It does not require a prewash step and is used at full strength. It meets the requirements for low sulfur, low halogen, and low-sodium. -
FLP-1 is a special water based fluorescent penetrant concentrate designed for through leak testing and general metal working surface flaw detection. -
FP-921 is used for the detection of fine cracks, porosity, and through leaks on metals, composites, synthetic materials, and some plastics. -
FP-922 is used for the detection of fine cracks, porosity, and through leaks on metals, composites, synthetic materials, and some plastics. -
FP-923 is used for the detection of fine cracks, porosity, and through leaks on metals, composites, synthetic materials, and some plastics. -
The UV-A Digital Light Meter is a compact, rugged, easy to operate, multi-function UV Meter proven to be highly effective for measuring and calibrating UV-A light sources used in fluorescent magnetic particle and liquid penetrant NDT inspections. -
The Magnaflux White Light Meter accurately measures visible light by foot candles and lux, and includes white light meter and a permanently affixed white light sensor, battery and carrying case. -
The REL C4 Magnum GLO-Black LED UV inspection light utilizes the latest in safe high output UV-A LED technology. This GLO-Black LED UV inspection light is a highly maneuverable lightweight solution that maximizes operator safety and time on task. The C4 Magnum contains 4 high flux-UV LED emitters that have a built in static-electric discharge circuit to allow the light to perform in all environments regardless of ambient conditions. -
The REL C4 Magnum-GO LED UV-A Lamp and White Light integrates both UV-A and white light emitters. The Magnum-GO utilizes the latest in safe high output LED technology. This ergonomically designed inspection lamp is a highly maneuverable lightweight solution that maximizes operator safety and efficiency. -
This black light is a highly maneuverable lightweight solution that maximizes operator safety and time on task. The C4 Nomad contains 4 high flux-UV LED emitters that have a built in static-electric discharge circuit to allow the light to perform in all environments regardless of ambient conditions. -
The REL LED C4 Nomad-GO integrates both UV-A and white light emitters. The cordless Nomad-GO provides a highly maneuverable lightweight solution that allows operator flexibility with a rechargeable 18V battery. The Nomad-GO includes two 1.5 Amp batteries to enable continuous use in either UV-A or white light. -
UV-A Inspection Flashlights
Affordable, Compact, UV-A LED Flashlights Designed Specifically for NDT -
Powerful, rechargeable, high-intensity UV-A inspection lamp featuring state-of-the-art, ultra-hi-flux LED technology! -
The REL Model GLO-Black Profusion LED UV Inspection light system utilizes the latest in safe high output UV-A LED technology. This black light is a highly conformable modular solution that maximizes operator safety and time on task. Each Profusion module contains separate 4 high flux-UV LED emitters that have a built in static-electric discharge circuit to allow the light to perform in all environments regardless of ambient conditions. -
REL Profusion XW Attributes: Waterproof - IP68 Rated 100% Continuous duty at full output Emitter: UV-A -
R-502 finds wide use in field weld and weld repair inspection. It is used in the inspection of refinery processing equipment that is at elevated temperatures, speeding up the inspection process time by eliminating the cool down required for standard penetrant processing. Protective gloves should be worn while working on hot surfaces to avoid burns.Available as 1 pint (0.5 L), 1 gallon (3.8 L), 5 gallon (18.9 L)
